Tag Archives: quality

Ristul’s Extraordinary Market

I was browsing Facebook the other day, when I saw a “Suggested Post” that seemed to be relevant to me! Imagine my surprise when I found out it was a small Miniatures/Scenery company, offering their wares! After a quick check of their website, I took the plunge and ordered a few bits!

Ristul’s Extraordinary Market (http://ristulsmarket.com/) are a small company based in Poland who make resin scenery pieces. The parts that initially caught my eye were the Food Crates and Baskets.

A selection of food crates and baskets.

A selection of food crates and baskets.

I noticed that they also had a similar offering, but made of individual pieces (cast together on bases) :

Individual Food Containers

Individual Food Containers

These can be cut away and used separately, unlike the first, which are larger blocks.

While browsing the rest of the site, I found a couple more sets:

Mushrooms

Mushrooms

Books

Books

Book Holders

Book Holders

Book Holders (Reverse View)

Book Holders (Reverse View)

All of the Pieces Together

The Whole Lot!

So, Do I like them?
I like the speed of response! On glancing at the website, I sent a Facebook message to Ristul with a few queries. Answered within the hour. I replied to let Ristul know I had ordered, and he gave me an estimate on timing for shipping. I ordered late Friday, so he said he’d get them out Monday Morning, should be with me by the end of the week. (website states 1-3 weeks). They arrived Saturday. Can’t complain.

The models themselves are very detailed, as I hope the photos show. The food section has a selection of apples, pumpkins, carrots, fish and others, all very nicely carved. I hope my painting does them justice!

Close up of Food Containers

Close up of Food Containers

The mushrooms are more simplistic, but still more detailed than the ones I throw together out of spare Milliput. Should be useful for sprucing up anything Orky. I’d like to get more, but, although they are not overpriced, I’m not sure I can justify spending money on things I can make myself.
The books, on the other hand, are very nice. Small, but still well detailed, with lots of character, and the Holders really set them off nicely.

There is an amount of ‘flash’ from the moulding process on some of the pieces, especially the “runs” of mushrooms and books, but it is very flimsy, and looks like it will be no trouble to clean up. Much less than I have seen on some Games Workshop offerings! (Yes, I’m looking at you, “Fine”Cast! Yes, you should look ashamed!) But the actual pieces are very well cast – little to no mould lines, and very crisp corners, no ‘blurring’ or softened edges. There are a couple of cracks in the resin in some of the “runs”, but they are on the holding-section, not the actual pieces, so nothing to worry about.

I’ve just been gifted a new X-acto knife, so these cut-away pieces are the perfect test for it!
The thinner pieces were actually very brittle, making it easy to snap away from the scenery – useful for tidying up, but it does make me worry for the strength of the smaller pieces!
The thicker sections, on the other hand, were quite solid, and took some careful work to cut through, but, when eventually removed from the frame, looked very neat.

Price-wise, I was reasonably impressed. You can check out the individual prices on the website, but the full sets that I bought (two different Food sets, one Mushroom set (two ‘runs’), one Book set, one Book Holder set) came to a few pennies over £25 (35 Euros).

So, overall, I’m going to give a Twenty Two out of Twenty Three*, with just one mark deducted for minor ‘flash’. I recommend that you check out http://ristulsmarket.com/, as I’m sure you’ll find something you like.

—–

*Scoring System: I decide how much I like it, and pitch an appropriate number out of an arbitrary total. The judges decision is Final. Until I change my mind, which has been known.

The Tower Continues …

I got round to giving the Quality CD Tower a quick spray with Games Workshop Rough Coat (No longer available, I believe – no loss!). Its not very rough, more of a slight texture.

Tower with Rough Coat

Tower with Rough Coat

I’ll give it another layer, and see if that gives it more texture, and I’m very tempted to put Stone Coat over the top, which, last time I used it, gave a much deeper effect.

I have also dug out some Imperial Architecture to liven it up with:

Tower With Buttresses

Added Buttresses!

For now, these have only been propped into place to show how they will look. Once the surface is finalised, they’ll be glued and painted up nicer.
I’ve got a load of extra bits for the top, including skulls, Imperial Aquila and some lamps which will be placed around the rim. I’m not sure what to crown the piece with, maybe a radar dish, or gun-platform. Of maybe I can find a “statue” or monument to put on top.

Watch this space!
(Or leave feedback!)

 

Quality CD Tower

As previously mentioned, I have a new project. The “Quality CD Tower”:

Quality CD Building

Quality CD Tower

The current plan:

  • Glue the two pieces together, and find an appropriate base.
  • Spray with Rough-Coat.
  • Affix some Imperial Buttresses and other accoutrements.
  • Add a level of battle damage
  • Repair battle damage with Ork Tek (welded plates, painted with glyphs and Klan Symbols). Corrugated cardboard makes good metal sheets, and lolly sticks for wooden planks.
  • I’ll then need to add some details/bitz/decoration. I’ve got a few barrels and crates in my bitz-box, and should be able to knock something together for a comms dish on top.
  • Extra Credit: I’m considering turrets on the side, either just as gun-ports, or big enough to hold a model or two.
  • Distinction/Project Two: A ruined version (either before the Orks repair it, or more likely after the Forces of Chaos (or Tyranids, depending upon which Army my friend plays next!) have bombarded it. I’ll be using GW’s Dreadstone Blight fantasy Tower as an inspiration for this.

There will be a Work-in-Progress report on the project as it unfolds, but it may take a while to fit it into my schedule.

Christmas Presents!

Actual presents included an MP3 player, converter to play it in the tape deck in the car, chocolates and fragrances. But more importantly, I got PACKAGING! 🙂

MP3 packaging

Clear plastic from MP3 packaging.

This clear plastic can either be used for windows, or cut and painted to make any flat surface. If I was still making Epic Scale scenery, it might make the basis for a building.

Walnut Whip Packaging

Walnut Whip packaging

This walnut whip packing is far too flimsy to use as-is, but I’ve got some ideas for padding the insides to firm it up. I’m currently considering paper mache, or a sand/PVA mix. I’m not sure yet what to build from it, but it will be used for something!

Quality Scenery!

Quality Scenery!

Now this, I have ideas for! Turned upside down, it will make a fine building. The base has a 2-3mm recess, about an inch in, and I may build a second storey on it. Quick spray of rough-coat, paint it up, add a few doors/windows/etc, should be a nice centerpiece to fight over!

EDIT: New idea for Quality scenery!

Quality CD Building

Quality CD Building

Current though is to make it an Imperial Bastion, taken by Orks.

The more observant of you may have noticed that in the last photo, Barry has a new Staff! Well, it’s the same old cocktail stick, but I’ve been promising him that I’d paint it up in Inch-markers for years. Now that 40k-6th allows pre-measuring, I have no need to sneak a measuring stick onto the battlefield, and so can keep him on the workbench for scaling models!